Model NO.:ECO4413SD 25W (24)/220AC
Color Temperature:3000k / 4000k / 5000k / 5700k
Certification:CE, CQC, RoHS
Package:Carton or According to The Customers' Needs
Specification:CE, RoHS, CQC
Luminous Flux (Lm):2375
Color Rendering Index:Ra70
Production Capacity:10, 000PCS/Month
Tunnels, underpasses, railways, underground parking lots and other
places where this kind of lighting is needed.
The whole light meets the standard of IP65 rating
The light housing is adopted aging resistant silicone rubber to
seal belt, which could perfectly lining to heat sink, end cover and
glass. The surface of the light has been anodizing and spraying
treated. The whole light meets the standard of IP65.
Light distribution system with high reflectivity
Efficiently improves reflectivity rate, and ensures output of
luminous flux. Specifically controls the LED light under the
requirement that improved the uniformity of the light effect and
light energy utilization, which highlights the LED street light
energy saving advantages.
Improve security of driving with high CRI (Color Rendering Index)
LED Tunnel light displays a more realistic color of subject. Its
color rendering index reaches at 70 that is close enough to natural
light. The driver can adapt to the light color changes quickly when
drives into the tunnel that guarantees a more safety driving.
High strength light structure design
High strength light structure and bracket design. It meets the
requirement of tunnel light with 400Km/h high speed railway. The
light installation angle is around 50° and easily to install.
Both RS485 and Zigbee wireless dimming controlling systems could be
configured our lighting fixtures that could realize that could
realize LED intelligent control and saving energy consumption
Employed the light source with high light efficiency and low
luminance decay, as well as modularized, it could be hot swapping,
and exchange with other company's module in same parameter.
Housing is adopted flash silver to spray on die casting aluminum
and extruded oxidized aluminum with unique structual design. The
light is equipped with side hanged installing supports that is
convenient to install and disassemble on site.
High strength PC material is employed by diffuser.
As this light is adopted modularized designing concept, maintenance
and disassembling could be finished with bare hands.
The fins are designed as airflow direction to enhance heat
dissipating performance and proof dust.
Specific sealing design for structures is for reaching IP 65 of
light protective level.
Easy to clean, as glass surface could average the pressure, it
would not crush when washing by high pressure water gun.
Light source is installed externally and could be dimming.